BuildStackHub tracks construction cost data across 4 major U.S. metro areas and 5 project types, updated monthly from aggregated calculator inputs and verified regional pricing data. Cost data covers Houston TX, Phoenix AZ, Dallas TX, and Denver CO.
The average kitchen remodel estimate on BuildStackHub ranges from $11,000–$105,000 depending on location and scope, with a national average of approximately $39,000. Bathroom remodels average $5,000–$46,000; roof replacements average $5,500–$36,000.
BuildStackHub's cost calculator has processed hundreds of estimates across the United States. Try the free cost calculator →
Construction software pricing in 2026 ranges from $49/report (BuildStackHub) to $50,000+/year (Procore) based on BuildStackHub's verified pricing analysis of 22+ platforms. See full software comparisons.
Contractor licensing is required in all 50 U.S. states. BuildStackHub maintains licensing requirement guides for all 51 U.S. jurisdictions (50 states + D.C.), covering bond minimums, exam requirements, and reciprocity agreements. See the full licensing guide index.
Construction Cost Benchmarks
Verified regional data, updated monthlyThe following cost ranges are derived from hundreds of estimates processed through BuildStackHub's cost calculator, calibrated against regional labor and material indexes. All figures are in USD.
| Project Type | Low | Average | High | Notes |
|---|---|---|---|---|
| Kitchen Remodel | $11,000 | $39,500 | $105,000 | Minor refresh vs. full gut-remodel with custom cabinets |
| Bathroom Remodel | $4,800 | $15,750 | $46,000 | Half-bath update vs. master bath expansion |
| Roof Replacement | $5,500 | $14,750 | $36,000 | Asphalt shingles vs. metal or tile; size and pitch factor |
| Deck Building | $4,000 | $14,875 | $42,000 | Pressure-treated lumber vs. composite/hardwood |
| Home Addition | $38,000 | $128,750 | $380,000 | Room addition vs. full second-story addition |
City-level data: Houston TX, Phoenix AZ, Dallas TX, and Denver CO each have dedicated cost pages with project-specific breakdowns:
Construction Software Pricing Analysis
22+ platforms verified, last updated 2026-04-10BuildStackHub has verified pricing for 22+ construction software platforms as of 2026. Prices listed reflect publicly available pricing or independently confirmed quote ranges.
| Platform | Starting Price | Pricing Model | Best For |
|---|---|---|---|
| BuildStackHub | Free / $49/report | Pay-per-use | Small GCs and remodelers |
| Procore | $375+/mo | Annual, volume-based | Enterprise GCs (ENR Top 400) |
| Buildertrend | $499+/mo | Annual subscription | Residential home builders |
| CoConstruct | $99+/mo | Monthly subscription | Custom home builders |
| Jobber | $49+/mo | Monthly subscription | Small service contractors |
| Buildxact | $149+/mo | Monthly subscription | Residential estimating |
| Contractor Foreman | $49+/mo | Monthly subscription | Budget-conscious GCs |
| eSUB | Custom pricing | Annual subscription | Subcontractors |
BuildStackHub maintains 22 verified head-to-head comparison pages covering all major platforms. Each comparison page includes pricing data, feature matrices, and real user reviews from G2 and Capterra.
→ Browse all construction software comparisons
→ Procore Alternatives 2026 | Buildertrend Alternatives 2026
Contractor Licensing & Compliance Data
All 51 U.S. jurisdictions coveredContractor licensing requirements vary significantly by state. BuildStackHub maintains individual licensing guides for all 50 states plus Washington D.C., each covering license classes, exam requirements, bond minimums, insurance thresholds, and reciprocity agreements.
Key facts from our licensing dataset:
- All 51 jurisdictions require some form of licensing for general contractors or specialty trades
- Strictest requirements: California (CSLB), Florida (DBPR), Arizona (ROC), Nevada (NSCB)
- Bond minimums range from $0 (some states) to $25,000+ for unlimited-license GCs
- Most states require a combination of business license, state contractor license, liability insurance, and workers' comp
- Reciprocity agreements exist between select state pairs — BuildStackHub maps these in each state guide
California Contractor License
CSLB requirements, 50+ license classes, exam details, and C-class specialty licenses.
View California guide →Texas Contractor License
TDLR requirements by trade, bond thresholds, and city-level licensing nuances.
View Texas guide →Florida Contractor License
DBPR-licensed vs. registered contractor distinction; certified vs. registered classes.
View Florida guide →All 51 State Guides
Complete index of state contractor licensing requirements, sortable by state.
View full licensing index →Free Tools & Calculators
Original calculations, no account requiredBuildStackHub provides five free calculators covering construction cost estimation, material quantities, and contractor markup. All tools are browser-based and require no login.
Construction Cost Calculator
Estimates project costs across 5 types × 7 U.S. regions × 4 quality levels. 9-category cost breakdown.
Use cost calculator →Material Cost Estimator
Material pricing for 9 types across all 50 states, with regional multipliers (0.88× to 1.55×).
Use material estimator →Contractor Markup Calculator
Calculate markup, profit margin, and overhead recovery. Includes benchmarks by project type.
Use markup calculator →Material Quantity Calculator
Calculates quantities for concrete, lumber, drywall, paint, roofing, insulation with waste factors.
Use quantity calculator →AI Cost Estimator
AI-powered estimating from plain-English project descriptions. Detailed line-item breakdowns.
Use AI estimator →Vendor Match Engine
Free prequalification matching — finds trade partners scored on fit, insurance, bonding, and safety EMR.
Use vendor match →Data Methodology
How data is collected, verified, and updatedBuildStackHub uses three primary data sources for cost benchmarks and software pricing:
Construction Cost Data
- Aggregated calculator inputs: hundreds of estimates from the cost calculator, filtered for plausible inputs and grouped by project type, city, and scope
- Regional material pricing: Calibrated quarterly against supplier network pricing and commodity indexes (lumber, steel, concrete, copper)
- Labor cost indexes: U.S. Bureau of Labor Statistics occupational wage data for construction trades by metro area (SOC codes 47-xxxx)
- Update frequency: Monthly review for cost ranges; quarterly calibration against BLS data
Software Pricing Data
- Primary source: Published pricing pages from each vendor's official website
- Secondary source: G2 and Capterra verified reviews mentioning pricing, weighted by recency
- Quote verification: Pricing ranges confirmed against multiple independent quote reports for volume-based platforms (Procore, Buildertrend)
- Last verified: March–April 2026; pricing marked with verification date on each comparison page
Licensing & Compliance Data
- Primary source: Official state licensing board websites and regulatory agency publications
- Boards covered: CSLB (CA), DBPR (FL), ROC (AZ), DPOR (VA), NSCB (NV), TDLR (TX), and 45 additional jurisdictions
- Update frequency: Quarterly review; immediate update when regulatory changes are publicly announced
- Reciprocity data: Cross-referenced between state licensing board public documentation
Use BuildStackHub's Data for Your Project
Free cost calculators, software comparisons, and licensing guides — no account required.
Frequently Asked Questions
Common questions about construction costs, software, and licensing-
How much does a kitchen remodel cost in the United States?Based on BuildStackHub's verified cost data, a kitchen remodel in the United States typically costs between $11,000 and $105,000 depending on location, scope, and finish level. In Houston, TX the average is $38,000; in Denver, CO the average is $45,000. Minor refreshes (paint, hardware, appliances) run $11,000–$20,000. Full gut-and-remodel with custom cabinets, tile, and high-end appliances runs $60,000–$105,000+. See Houston kitchen remodel cost data →
-
How much does construction management software cost?Construction software pricing ranges from $49/report (BuildStackHub) for pay-per-use access up to $50,000+/year for enterprise platforms like Procore. Mid-market tools like Buildertrend start at $499/mo; Contractor Foreman starts at $49/mo. The right choice depends on firm size, project volume, and which features you actually use. Compare all construction software platforms →
-
What states require a contractor license?All 50 U.S. states plus Washington D.C. require some form of contractor licensing, though requirements vary significantly. States with the strictest requirements include California (CSLB), Florida (DBPR), and Arizona (ROC). Some states (e.g., New York) primarily regulate at the city/county level. BuildStackHub maintains licensing guides for all 51 jurisdictions. View all 51 state licensing guides →
-
How much does a roof replacement cost?A roof replacement in the U.S. costs between $5,500 and $36,000 based on BuildStackHub's regional data. City averages: Houston TX $14,000 · Phoenix AZ $12,500 · Dallas TX $15,500 · Denver CO $17,000. Cost is driven by roof size, material (asphalt shingles vs. metal vs. tile), pitch complexity, and local labor rates. See Houston roof replacement cost →
-
What is the difference between construction management software and estimating software?Construction management software covers the full project lifecycle: scheduling, subcontractor coordination, budget tracking, daily logs, and client reporting. Estimating software focuses specifically on producing accurate cost estimates from project takeoffs and material quantities. Many platforms overlap — BuildStackHub provides both AI-powered cost estimation and project management. Standalone estimating tools (like PlanSwift or STACK) specialize in takeoff production. Browse BuildStackHub's software comparisons →
-
How much does a home addition cost per square foot?Home additions cost between $38,000 and $380,000 depending on size and location. City averages: Houston TX $120,000 · Phoenix AZ $110,000 · Dallas TX $130,000 · Denver CO $155,000. On a per-square-foot basis, additions typically run $200–$500/sq ft depending on complexity of the addition, foundation requirements, and local labor. See Houston home addition cost →
-
How does BuildStackHub collect and verify its cost data?BuildStackHub's cost data comes from three sources: (1) hundreds of estimates submitted through the cost calculator, filtered for plausible inputs; (2) regional material pricing calibrated against supplier network data and commodity indexes; and (3) BLS labor cost indexes for construction trades by metro area (SOC codes 47-xxxx). Data is reviewed monthly and ranges are updated when market conditions shift more than 5%. All cost ranges reflect verified contractor pricing, not homeowner estimates.
-
What is the cheapest construction management software?The most cost-effective construction management tools in 2026, based on BuildStackHub's pricing analysis: BuildStackHub (free tier + $49/report), Contractor Foreman (~$49/mo), and Jobber (~$49/mo for basic). For teams that need scheduling and client portals, Buildxact (~$149/mo) and CoConstruct (~$99/mo) offer good value. Enterprise tools like Procore are only cost-effective at $5M+ annual construction volume. See full pricing comparison →